Fit-test tight-fitting respirator users at least annually
Under Occupational Safety and Health Standards — General Industry
Fit-test tight-fitting respirator users at least annually. Applies only where the specific standard and its exceptions cover the employer, equipment and activity. Imported research notes (check before approving): • Duty holder: employer • Timing in the source: "The employer shall ensure that an employee using a tight-fitting facepiece respirator is fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter."
When it’s due
The employer shall ensure that an employee using a tight-fitting facepiece respirator is fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter. — exact deadline not calculated
When you track it, you set the due date that applies to you. Remindash schedules reminders before it.
From the source
Open source document ↗“The employer shall ensure that an employee using a tight-fitting facepiece respirator is fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter.”29 CFR §1910.134(f)(2), 29 CFR §1910.134(f)(2) · OSHA General Industry Standards
Key information
- Obligation type
- Other
- Frequency
- Annually
- Applies to
- Conditional on the coverage, exclusions and exceptions of 29 CFR §1910.134(f)(2); not universal to all workplaces.
- Source
- 29 CFR §1910.134(f)(2), 29 CFR §1910.134(f)(2)
- Policy last reviewed
- Nov 12, 2026
Check that it applies to you. This requirement was identified from the source document. Whether it applies depends on your organization’s circumstances — review the official source and get professional advice where appropriate.